How to Update and Root Your Samsung Galaxy Tab 2 10.1 (GT-P5110) to Jelly Bean 4.1.2
If you own a Samsung Galaxy Tab 2 10.1 (GT-P5110) and want to update it to the latest Android version, Jelly Bean 4.1.2, you can do it easily by following this guide. You will also learn how to root your device after the update, which will give you more control and customization options over your tablet.
P5110XXCMA2 P5110OXXCMA4 SMO.zip
Before you proceed, make sure you have backed up your data and have at least 50% battery charge. You will also need a Windows PC, a USB cable, and the following files:
P5110XXCMA2 P5110OXXCMA4 SMO.zip: This is the official firmware file for the Samsung Galaxy Tab 2 10.1 (GT-P5110) with Jelly Bean 4.1.2. You can download it from here.[^2^]
Odin3 v3.07: This is a tool that will help you flash the firmware file to your device. You can download it from here.[^1^]
CWM-SuperSU-v0.99.zip: This is a file that will help you root your device after the update. You can download it from here.[^1^]
Once you have downloaded these files, follow these steps:
Extract the P5110XXCMA2 P5110OXXCMA4 SMO.zip file to get a .tar.md5 file.
Extract the Odin3 v3.07 file and run the Odin3 v3.07.exe file as administrator.
Turn off your device and boot it into download mode by pressing and holding Volume Down + Power buttons until you see a warning screen. Then press Volume Up to continue.
Connect your device to your PC using the USB cable. Odin should recognize your device and show a blue box with a COM port number.
In Odin, click on the PDA button and select the .tar.md5 file that you extracted in step 1.
Make sure that only Auto Reboot and F. Reset Time are checked in Odin and nothing else.
Click on Start and wait for Odin to flash the firmware file to your device. Do not disconnect your device or interrupt the process.
When Odin shows a green PASS message, your device will reboot automatically.
Disconnect your device from your PC and wait for it to boot up completely.
Congratulations! You have successfully updated your Samsung Galaxy Tab 2 10.1 (GT-P5110) to Jelly Bean 4.1.2.
To root your device, follow these steps:
Copy the CWM-SuperSU-v0.99.zip file to the internal storage of your device.
Turn off your device and boot it into recovery mode by pressing and holding Volume Up + Power buttons until you see the Samsung logo, then release them.
In recovery mode, use the volume buttons to navigate and the power button to select.
Select install zip from sdcard and then choose zip from sdcard.
Select the CWM-SuperSU-v0.99.zip file that you copied in step 1 and confirm the installation.
When the installation is done, go back to the main menu and select reboot system now.
Your device will reboot normally. 0efd9a6b88
https://www.mypowercord.com/group/powerpayless-group/discussion/40d9dc7b-7b2e-43e9-b4e4-d16469d0d02f